aadimanav
10-26 01:43 AM
It looks like the posts under the IV Home Page Rcent Forum Posts Section no longer show up in descending order of last-update date. Is this intentional?
windycloud
07-15 05:19 PM
I have my original I94 from when I entered on F-1. And now I have the I-94 attached to my H-1B. Which one do I hand in?
sash
06-20 04:05 PM
What is the ETA to get the receipt if you file in July 2007?
Oct007
11-11 08:53 PM
I have followed what many people suggested and applied for the H1B renewal.
Now I have to travel to India in the last week of November. I have a valid EAD and AP document. My H1B will be expiring and the renewal will be filed but I wont be receiving the approval.
I can use the AP and renter U.S but will that result in a cancellation of my H1B renewal?
Now I have to travel to India in the last week of November. I have a valid EAD and AP document. My H1B will be expiring and the renewal will be filed but I wont be receiving the approval.
I can use the AP and renter U.S but will that result in a cancellation of my H1B renewal?
more...
GC_Q
04-21 10:34 AM
Hello fromnaija,
I don't think we need to start out GC process everytime we move to a different location. I believe that GC is for future employment so according to me we don't need to re-start GC process when we move from east to west and north to south.
Thanks
I don't think we need to start out GC process everytime we move to a different location. I believe that GC is for future employment so according to me we don't need to re-start GC process when we move from east to west and north to south.
Thanks
Munna Bhai
02-08 11:32 AM
Hello,
My thread had wrong title and that created more problem, hope this title makes sense and please feel free to share your experience.
I know the following, I worked very hard for the current company and they pay me the way they pay any immigrant. Atlast got my I-140 approved and now I would like to go ahead with available options and at any cost I will protect I-140 from being revoked.
If I-140 is not revoked:
a)One can extend H1b through any company for 3-years.
b)One can get PD ported.
If I-140 is revoked:
a)It is a grey area but commen-sense says that one is out-of-status.
How to protect I-140 being revoked:
a)Transfer the case to your own attorney?? See that employer or employer's attorney has not much say on your case file??
b)Give some valid reason to current employer until your I-140 from other company is approved.
Or any other thoughts???
My thread had wrong title and that created more problem, hope this title makes sense and please feel free to share your experience.
I know the following, I worked very hard for the current company and they pay me the way they pay any immigrant. Atlast got my I-140 approved and now I would like to go ahead with available options and at any cost I will protect I-140 from being revoked.
If I-140 is not revoked:
a)One can extend H1b through any company for 3-years.
b)One can get PD ported.
If I-140 is revoked:
a)It is a grey area but commen-sense says that one is out-of-status.
How to protect I-140 being revoked:
a)Transfer the case to your own attorney?? See that employer or employer's attorney has not much say on your case file??
b)Give some valid reason to current employer until your I-140 from other company is approved.
Or any other thoughts???
more...
sandy_anand
01-24 10:09 AM
Guys, sorry I do not understand the numbers very well. Assuming the same amount of spillover numbers for 2011, what will be the status of EB2 by December-2011??
Thanks,
Prasad.
If EB2-India receives around 20000 visas in 2011, the EB2-India priority dates could move to between Feb 2007 and April 2007 depending on EB3-EB2 upgrades.
Thanks,
Prasad.
If EB2-India receives around 20000 visas in 2011, the EB2-India priority dates could move to between Feb 2007 and April 2007 depending on EB3-EB2 upgrades.
TheColonial
04-24 12:18 AM
Search SDL its a nice way to learn graphics and moving imges and such.
http://en.wikipedia.org/wiki/Simple_DirectMedia_Layer
Whoa! The guy says he wants to learn Win32 and you point him at SDL? Interesting! :)
Everything that you want to do can be achieved without touching DirectX or OpenGL (and hence SDL), and using them will only confuse you if you're looking to learn to write Windows code.
I'd recommend attempting your problem using nothing but Win32 and the core C++ functionality - IMHO, you should avoid muddying the waters with other APIs.
Just my $0.02.
OJ
http://en.wikipedia.org/wiki/Simple_DirectMedia_Layer
Whoa! The guy says he wants to learn Win32 and you point him at SDL? Interesting! :)
Everything that you want to do can be achieved without touching DirectX or OpenGL (and hence SDL), and using them will only confuse you if you're looking to learn to write Windows code.
I'd recommend attempting your problem using nothing but Win32 and the core C++ functionality - IMHO, you should avoid muddying the waters with other APIs.
Just my $0.02.
OJ
more...
sjhugoose
February 15th, 2004, 05:54 PM
I have a Sony DSC F717. I got it to photograph model trains, so it is almost lways in macro mode. Frequently, the image blurs toawrds the back, even when set at the highest F-stop. The subject is usially about 5-12 inches away from the camera, depending on the model I am photographing. The models are about an inch high and up to 10 inches long.
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
Your experiencing an effect called Depth of Field(DOF). This is commen and usally you want to minimize it for effect but not in your case.
You will need to learn to use a DOF calculator, there is one on this site but it does not include the 2/3" sensor sive you camera has. A better one for you right now may be this calculator here: http://www.dpreview.com/reviews/nikoncp5700/page2.asp
Using this you can determine the distance you need, focal length and distance to subject to obtain the desired DOF. Currently on the wide end of your camera, you'll need to move about a 1.5 feet from the focus point with f8 to get the DOF you desire. If you get the WA adaptor you'll be able to move closer to about .9 feet from the focus point and still obtain the DOF you desire.
You'll never be able to be within 5 inches from the object and obtain the DOF you desire, it simply is not possible with you camera. As to which WA adaptor to get? I don't know. I've never used anything of the sort so I can not answer that question for you.
Scott
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
Your experiencing an effect called Depth of Field(DOF). This is commen and usally you want to minimize it for effect but not in your case.
You will need to learn to use a DOF calculator, there is one on this site but it does not include the 2/3" sensor sive you camera has. A better one for you right now may be this calculator here: http://www.dpreview.com/reviews/nikoncp5700/page2.asp
Using this you can determine the distance you need, focal length and distance to subject to obtain the desired DOF. Currently on the wide end of your camera, you'll need to move about a 1.5 feet from the focus point with f8 to get the DOF you desire. If you get the WA adaptor you'll be able to move closer to about .9 feet from the focus point and still obtain the DOF you desire.
You'll never be able to be within 5 inches from the object and obtain the DOF you desire, it simply is not possible with you camera. As to which WA adaptor to get? I don't know. I've never used anything of the sort so I can not answer that question for you.
Scott
synergy
12-03 06:29 PM
I applied for my green card almost six years back (EB3 Jan 2003) and working with the same employer for more than 7 years on H1B. My 140 was approved in 2007 September. Recently I got a new job with pretty similar title and job descripiton. The job is in a different state . Here is my question...
Is it better to use my EAD (which is valid until October 2010) or do a H1B transfer? In case my current employer withdraw the 140 application ,whether that cause any issues?
Do I need to go back to my current employer once I get my green card?
Is it possible to go back to H1B once I start using EAD?
Appreciate quick responses.....
Is it better to use my EAD (which is valid until October 2010) or do a H1B transfer? In case my current employer withdraw the 140 application ,whether that cause any issues?
Do I need to go back to my current employer once I get my green card?
Is it possible to go back to H1B once I start using EAD?
Appreciate quick responses.....
more...
tikka
08-06 09:48 AM
...bump...
I will be there..
I will be there..
GCplease
08-16 02:52 PM
I guess we dont have a choice but to pay.
Thank you all for your advise.
One more thing, no form G-28 was given to me to sign. What does this mean?
That is strange. When a legal attorney represents you, you should sign G-28 authorizing the attorney to act on your behalf. Check with the attorney.
Thank you all for your advise.
One more thing, no form G-28 was given to me to sign. What does this mean?
That is strange. When a legal attorney represents you, you should sign G-28 authorizing the attorney to act on your behalf. Check with the attorney.
more...
transpass
08-04 11:10 AM
me too...NSC filer, but transferred to TSC...
RD july 2, PD 12/2005
RD july 2, PD 12/2005
gc_in_30_yrs
09-12 08:15 PM
If you are "on the bench" the employer is obligated to pay you.
If you state that you are on vacation when in fact your are "on bench", and later misrepresent being on the bench as vacation to USCIS you and your employer either committing fraud or conspiring to commit fraud.
The employer must allow for "on the bench" time in the salary quoted in the LCA that accompanies the I-129 for H1B. If "on the bench" time is not allowed for it probably invalidates the prevailing wage comparison.
If your employer does not allow for 'on the bench' time in the wage rates quoted, then there is a reasonable argument that you are not meeting prevailing wage, and are infact undercutting US wages (and then some of what Lou Dobbs says is right).
If you are a consultant you could drop the quoted salary on LCA (but must remain above prevailing wage) to allow for risk of "on the bench" or any other circumstances. That way there is money to cover any gap. However, that requires more trust in the middle man - employer.
I'm not sure if I've read it right, but it looks to me like you have made a public confession here.
Of course the period between projects is an ideal time for vacation, as there is no project schedule to deal with. So whether the law is being broken I guess depends on what the motivation is for the vacation, something that is hard to prove. If the employer says you are going to tell him that you are on vacation until he finds more work then that sounds illegal. If on the other hand if you say, "how about I take this opportunity for some vacation?", it is okay.
One would hope that USCIS expercise common sense. However, common sense could mean being suspicious of gaps because the system is clearly open to abuse.
Thanks for pointing out the isse I had. I meant to say; only that in between projects; it is okay to take vacation, but I was rude in explaining which caught everybody's attention. My thoughts were As You Explained.
If you state that you are on vacation when in fact your are "on bench", and later misrepresent being on the bench as vacation to USCIS you and your employer either committing fraud or conspiring to commit fraud.
The employer must allow for "on the bench" time in the salary quoted in the LCA that accompanies the I-129 for H1B. If "on the bench" time is not allowed for it probably invalidates the prevailing wage comparison.
If your employer does not allow for 'on the bench' time in the wage rates quoted, then there is a reasonable argument that you are not meeting prevailing wage, and are infact undercutting US wages (and then some of what Lou Dobbs says is right).
If you are a consultant you could drop the quoted salary on LCA (but must remain above prevailing wage) to allow for risk of "on the bench" or any other circumstances. That way there is money to cover any gap. However, that requires more trust in the middle man - employer.
I'm not sure if I've read it right, but it looks to me like you have made a public confession here.
Of course the period between projects is an ideal time for vacation, as there is no project schedule to deal with. So whether the law is being broken I guess depends on what the motivation is for the vacation, something that is hard to prove. If the employer says you are going to tell him that you are on vacation until he finds more work then that sounds illegal. If on the other hand if you say, "how about I take this opportunity for some vacation?", it is okay.
One would hope that USCIS expercise common sense. However, common sense could mean being suspicious of gaps because the system is clearly open to abuse.
Thanks for pointing out the isse I had. I meant to say; only that in between projects; it is okay to take vacation, but I was rude in explaining which caught everybody's attention. My thoughts were As You Explained.
more...
needhelp!
10-18 11:58 AM
is just as convenient.. you don't have to write a physical check.. I have been doing it.
And its better because then I know that nothing is getting cut off in terms of online processing fees.
Find a way out.
Another way to contribute a smaller amount is to buy IV merchandise. Buy 5 bumper stickers..
And its better because then I know that nothing is getting cut off in terms of online processing fees.
Find a way out.
Another way to contribute a smaller amount is to buy IV merchandise. Buy 5 bumper stickers..
glus
05-31 09:02 AM
Just contributed $100 through paypal. ID: 78D447032J342041H
Please, do the same. It is critical to get IV going further.
Please, do the same. It is critical to get IV going further.
more...
srinivas_o
01-08 10:53 AM
Thank you for the quick response.
You said there are 3 copies of AP. But my lawyer sent me only 2 copies. Is that a problem???
I recently entered US on AP. At the POE, I gave ONLY my passport and AP(it was 3 copies stapled together). Thats all.
The IO gave me one copy and said "you can keep one for your reference" and took the other 2. Then escorted to another room, where more people were waiting, and I had to wait for about 10 minutes and an officer called my last name and handed me over, my passport along with one copy of AP with some stamp on it.
I am still on H1, also got my EAD. I-485 is pending. The other documents that I carried was, a letter from my company stating that I work for them, and all my H1 copies...but I never showed any of those documents.
edit: While I was standing in line to be called by the IO, the person(indian) in front of me who was being served by the IO, gave many documents, eventhough the IO was saying "I don't need them". This guy was pro-actively telling her that he is working for so-and-so company, took some papers and was giving it to her, and she said politely that its not required...he was also entering on AP cause I saw that guy in the room.
So, Please don't over do. just give only the document that is asked for.
You said there are 3 copies of AP. But my lawyer sent me only 2 copies. Is that a problem???
I recently entered US on AP. At the POE, I gave ONLY my passport and AP(it was 3 copies stapled together). Thats all.
The IO gave me one copy and said "you can keep one for your reference" and took the other 2. Then escorted to another room, where more people were waiting, and I had to wait for about 10 minutes and an officer called my last name and handed me over, my passport along with one copy of AP with some stamp on it.
I am still on H1, also got my EAD. I-485 is pending. The other documents that I carried was, a letter from my company stating that I work for them, and all my H1 copies...but I never showed any of those documents.
edit: While I was standing in line to be called by the IO, the person(indian) in front of me who was being served by the IO, gave many documents, eventhough the IO was saying "I don't need them". This guy was pro-actively telling her that he is working for so-and-so company, took some papers and was giving it to her, and she said politely that its not required...he was also entering on AP cause I saw that guy in the room.
So, Please don't over do. just give only the document that is asked for.
minimalist
04-12 10:40 PM
Do we really need to attach a copy of the front page of the passport for AP renewal, wouldn't a copy of the DL be sufficient enough?
No need for passport front page.
No need for passport front page.
tikka
08-07 11:48 AM
[QUOTE=tnite;141114]Please join us for a tri state lunch meet. We would like to start working on volunteers/ mobilizing members for the DC rally. Even if you cannot take the day off and come to DC please come by for the lunch. We could really use help with banners/posters/ and ideas to make this a success.
WHEN: Saturday AUGUST 11th
LOCATION- 148 E 48TH St, New York, NY 10017 (between Lexington and Third Avenues.)
SORRY FOR THE CONFUSION!! LUNCH IS AT NOON!!!
WHEN: Saturday AUGUST 11th
LOCATION- 148 E 48TH St, New York, NY 10017 (between Lexington and Third Avenues.)
SORRY FOR THE CONFUSION!! LUNCH IS AT NOON!!!
kurtz_wolfgang
08-15 12:27 PM
Please Help Gurus....:confused::confused::confused:
satyasrd
06-01 09:31 AM
I agree and believe we can get #3 passed. It will provide relief to thousands like myself who have to struggle to maintain a status.
I have asked this question several times to IV/Pappu but got no response. Is is possible to ask for this provision asap ? We know that IV is working on a bigger cause to get us all GC's but honestly no one is sure when and if CIR will happen. Even if it does no one can guarantee that our interests will not be put aside.
I am surprised that whenever I ask for this temporary relief, I see no one else coming forward. I know that there are thousands waiting to file their I-485 but no one wants to speak up ?! That's very disheartening !
Even if we can get one of these, especially, Item #3 passed will provide relief to many candidates.
For example, we can request Congress to amend to "Allow USCIS to issue 3 year EAD along with I140 Approval."
Can IV help pass this request on Advocacy days?
I have asked this question several times to IV/Pappu but got no response. Is is possible to ask for this provision asap ? We know that IV is working on a bigger cause to get us all GC's but honestly no one is sure when and if CIR will happen. Even if it does no one can guarantee that our interests will not be put aside.
I am surprised that whenever I ask for this temporary relief, I see no one else coming forward. I know that there are thousands waiting to file their I-485 but no one wants to speak up ?! That's very disheartening !
Even if we can get one of these, especially, Item #3 passed will provide relief to many candidates.
For example, we can request Congress to amend to "Allow USCIS to issue 3 year EAD along with I140 Approval."
Can IV help pass this request on Advocacy days?
No comments:
Post a Comment